Power Over Ethernet

Power Supply / Inserter

The Pacific Wireless POE-xxi is an advanced power supply / power inserter. The power supply is autoranging on the input and has a regulated voltage output. It has overload and short circuit protection in addition to Ethernet surge suppression built-in. The POE-xxi is not a proprietary unit. It will function with any equipment that is compliant with the IEEE 802.3af POE standards. For all “i" models, the power is supplied on ethernet pins 4/5 (V+) and 7/8 (V-). For the “iR" models, the power is supplied on Ethernet pins 4/5 (V-) and 7/8 (V+). The POE-xxi comes complete with a standard North American 115 VAC power cord. International cords are available upon request. A Current Indicator (-CI) model is available. The LED will be AMBER until >35 mA current flows to the end device which will turn the LED to GREEN. This is a good way to remotely monitor the connection between the Power-Over-Ethernet (POE) and the end device, and to indicate that the end device is turned on. To order this model, add a “-CI" suffix to the standard part number.

Using POE to power remote devices has several advantages including;

• The power supply can be centrally located where it can be attached to an uninterruptible power supply.
• The user has the ability to easily power on reset the attached equipmentfrom a remote location.
• There is no need to run additional power cabling to the device as power can be supplied over the CAT5 ethernet cable.

Click Here for Datasheet

Ships same or within one business day.