Patton Model 2158 CopperLink 12.5-Mbps Ethernet Extender 2 pack

Model 2158 CopperLink 12.5-Mbps Ethernet Extender

Benefits

• High-speed full-duplex 12.5 Mbps communications link
• Extends Ethernet connections up to 4,500 ft. (1,372 m)
• Easy 2-wire CopperLink connection via built-in RJ-45 or 2-position terminal block
• Passes higher layer protocols and supports 802.1Q (VLAN tagging)
• Automatic learning and aging address table
• Five LEDs monitor power, CopperLink link and status, Ethernet link and activity
• Auto-sensing 10 or 100Base-T and full or half-duplex Ethernet operation
• No configuration required!

Take your network connections faster and farther over existing voice-grade wire with the Patton Model 2158 CopperLink Ethernet Extender!

The Patton CopperLink Ethernet Extender offers one of the most efficient, reliable, and cost-effective solutions for connecting peered 10/100Base-T Ethernet LANs; reaching remote PCs and equipment; or delivering last-mile ISP services—all at 12.5 Mbps! The Patton Model 2158 offers premium performance over your existing voice-grade telephone wire, eliminating the cost of installing new LAN grade cable or expensive fiber.

CopperLink Ethernet Extenders are compact, easy to install, and transparent to higher layer protocols. Simply connect the network equipment to the shielded Ethernet RJ-45F jack, the twisted-pair telephone wire to the CopperLink RJ-45F jack or terminal block, the external power supplies to the units and an appropriate power source, and you're ready to operate. The

CopperLink Ethernet Extenders will auto-sense and configure for 10Base-T or 100Base-T as well as full or half-duplex Ethernet operation. No configuration is required! Whether you are looking to make your network connections go farther and faster, increase the efficiency of your existing wiring infrastructure, or just simply extending your LAN, Patton's CopperLink Ethernet Extender is one of the most simple and cost effective solutions around!

Specifications

CopperLink Interface: RJ-45 (pin 4=TIP; pin 5=RING) and two-position terminal block (supports 19–26 AWG)
Ethernet Interface: 8-position shielded RJ-45. Auto-sensing 10/100Base-T with half or full-duplex operation
Protocol: Transparent to high layer protocols. Supports 802.1Q VLAN tagging
Transmission: CopperLink line rate: 12.5 Mbps; Data rate: 10 Mbps full-duplex
Surge Supression: CopperLink maximum current surge: 20kA (8/20_s) gas tube
Front Panel Indicators: Power, CopperLink Link and Error, Ethernet Link and Activity status.
External Power Supply Options:
• AC: 120 VAC and Universal Power Supply (100–240 VAC)
• DC: -48 VDC, -24 VDC, and -12 VDC (optional upon request)
Compliance: FCC Part 15 Class A; EMC Directive 89/336/EEC, Low
Voltage Directive 73/23/EEC; CE Mark
Temperature: 32 to 122°F (0 to 50°C)
Altitude: 0–15,000 ft (4,572 m)
Humidity: Up to 90% non-condensing
Dimensions:
• Standalone: 1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm)
• Rack card: 3.0 H x 0.83 W x 7.84 D in. (7.6 H x 2.1 W x 19.9 D cm)
Weight:
• Standalone: 0.4 lbs (0.18 kg) without power supply
• Rack card: 0.3 lbs (0.14 kg)

 

Delivery 1-2 weeks

Ordering information - Use Option Pull Down

2158/120-2PK	CopperLink Ethernet Extender Set (Local and Remote unit); 120VAC
2158/L	Local CopperLink High-Speed Ethernet Extender; RJ-45 and Terminal Block; No Power Supply
2158/R	Remote CopperLink High-Speed Ethernet Extender; RJ-45 and Terminal Block; No Power Supply
2158/L/120	Local CopperLink High-Speed Ethernet Extender; RJ-45 and Terminal Block; 120VAC
2158/R/120	Remote CopperLink High-Speed Ethernet Extender; RJ-45 and Terminal Block; 120VAC
2158/L/UI*	Local CopperLink High-Speed Ethernet Extender; RJ-45 and Terminal Block; (UI) 100-240VAC
2158/R/UI*	Remote CopperLink High-Speed Ethernet Extender; RJ-45 and Terminal Block; (UI)100-240VAC
2158-2PK	CopperLink Ethernet Extender Set (Local and Remote unit); No Power Supply
2158/UI-2PK*	CopperLink Ethernet Extender Set (Local and Remote unit); (UI) 100-240VAC
2158RC/L	Local High-Speed CopperLink Ethernet Extender Rack Card; RJ-45 and Terminal Block
2158RC/R	Remote High-Speed CopperLink Ethernet Extender Rack Card; RJ-45 and Terminal Block

When ordering standalone units, it is recommended that the 2158 be ordered in sets: one 2158/L (Local) and one 2158/R (Remote).

* =You must specify a country specific power cord

 

---