Engenius Technology

EUB9603H is a revolutionary high power 600mW 802.11n 1T1R USB adapter with external 5dBi antenna. With its fine tuned RF design, EUB9603H is capable of delivering up to 33dBm (2000mW) EIRP. It is fully backward compatible with 802.11b/g standard and support Pre-N technology.

Eliminate the limitation of placing an Ethernet-enabled device, such as a wireless access point near a power outlet. The EPE-5818Gaf delivers both data and electrical power to Ethernet-enabled devices using a single Ethernet CAT6 cable. EPE-5818Gaf Power-over-Ethernet (PoE) injector is 802.3af compliant, and also compatible with Gigabit 1000Mbps connection. It uses standard IEEE pin definition to power the device, and comes with a 48V/0.375A power supply. Pin# 1, 2, 3 and 6 for data transmission; pin# 4, 5, 7 and 8 for power to the device. The EPE-5818Gaf PoE generates power over CAT6 cable up to 300 feet (100 meter). By sending 48V, Ethernet terminals such as wireless LAN access point, IP phone and web camera can be powered remotely. It is especially ideal for outdoor networking facility and low port density installations.

EOC1650 is a revolutionary product consists of conciseness, quality, and flexibility. It comes with 7dBi internal antenna and upgradable SMA interface provides a customizable interface for enhanced network coverage. Attached suction cup allows quick installation on window or smooth surface.
Operation mode provides Access Point / Client Bridge / Client Router and high bandwidth up to 54Mbps. It features high transmitted output power and high receivable sensitivity. High output power and high sensitivity extends range and coverage to reduce the roaming between Access Points to ensure a stable wireless connection and reduce the expense of equipment.

The EAP-3660 is a smoke detector looking Wireless Access Point / Universal Repeater that operates seamlessly in the 2.4GHz frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) standard and SuperG 108Mbps high speed feature. It's the best way to add wireless capability to your existing wired network or to add bandwidth to your wireless installation.

ENH200 is a long-range outdoor wireless Client Bridge/ Access Point that operates on 2.4GHz frequency spectrum and provides high wireless data rate up to 150Mbps. The ENH200 features high transmitted output power, high receivable sensitivity and built-in dual polarization directional antenna. The high power can extend wireless range coverage. The dual polarity antenna allows installer to choose the best orientation to avoid interference, thus maximizing performance and stability. Requires External Antenna (see details).

EOC-2610 optional Mounting Kit for EOC-2610. Can be on similar style outdoor Access Points.
Discontinued Product

EAP9550 is a powerful and multi-functioned 11n Access Point and it can act three modes AP/WDS/Universal Repeater. Smoke detector appearance will minimize visibility. So this model can work properly at Hotel or public area.

The outdoor wireless device EOA3630 is a powerful, enhanced, enterprise scale product with 7 multi-functions. External N-type connector is ideal for upgradeable antenna to increase range and receive sensitivity. It features output power level adjustment, narrow bandwidth selection, traffic shaping and real-time RSSI indicator. EOA3630 comes with complete wall/pole mounting kit and supports PoE (24v) capable for quick outdoor installation. To ensure wireless security, it provides full coverage of latest security encryption mechanisms including WPA2, WPA, WEP and 802.1x.

The latest EOA7535 equips with two independent high-power 600mW RF radios which support 802.11a and 802.11b/g. With certified IP-68 enclosure, RF lightning protector and Ethernet surge arrestor, this outdoor product is designed to deliver highest performance and reliability under any harsh outdoor environments.