Model 2025 - 2029 Auto-Directional, Serial to Parallel Converters / These Miniature Converter Cables Automatically Select Parallel/Serial Mode

Benefits

• Auto-Directional Data Conversion
• Automatic Parallel-to-Serial or Serial-to-Parallel Mode Selection
• Automatic DCE/DTE Mode Selection (Model 2025 only)
• Support for Both Hardware and X-On/X-Off Flow Control
• Data Rates to 38,400 bps
• External Configuration Switches
• No AC Power or Batteries Required
• Integral 6 foot (1.8m) Cable (Custom Connectors and Lengths Available)
• Link Status LED Indicator

Multiple Models, pls select Product Variants from Detail Page

Benefits

• Extend your network up to 5 miles (8 km)at 24 AWG/0.5 mm
• 144 kbps using twisted pair of copper
• Plug-and-play-No configuration necessary!
• 10Base-T full or half-duplex Ethernet port
• Support for 802.1 Q VLAN tagged packet transmission
• LEDs provide quick status at a glance
• Test mode switch makes troubleshooting easy
• Convenient standalone desktop model

Multiple Models, pls select Product Variants from Detail Page

Benefits

• Extend your network up to 32,000 ft. (9,754 m)
• 2.3 Mbps extension using existing twisted pair of copper
• Plug-and-play-No configuration necessary!
• 10Base-T full or half-duplex Ethernet port
• Support for 802.1 Q VLAN tagged packet transmission
• LEDs provide quick status at a glance
• Test mode switch makes troubleshooting easy
• Convenient standalone desktop model

Multiple Models, pls select Product Variants from Detail Page

Benefits

• Auto-rate adaptation gives- the highest rate possible for for the extension distance of your network
• 4.6 Mbps over just a single twisted pair of copper
• Extension distances up to 32,000 feet (10 km)
• Auto-sensing 10/100 Ethernet port
• Integrated MDI-X switch to allow easy connection to any computer or LAN
• Auto-sensing full or half-duplex operation
• Support for 802.1 Q VLAN tagged packet transmission

Multiple Models, pls select Product Variants from Detail Page

Benefits

• Low cost/plug and play solution for campus wide network extension and delivery of last-mile ISP services over Ethernet
• Extends Ethernet distances up to 1 mile over 2-wire 24 AWG unconditioned lines
• Switch selectable asymmetrical or symmetrical line rates up to 16.67 Mbps!
• Auto-sensing 10Base-T or 100Base-TX
• Supports full or half-duplex Ethernet
• Transparent LAN bridging (Passes 802.1Q (VLAN) packets)
• Automatic learning, aging, & filtering source address table
• Stand alone and rack mount versions

Multiple Models, pls select Product Variants from Detail Page

Benefits

• High-speed full-duplex 12.5 Mbps communications link
• Extends Ethernet connections up to 4,500 ft. (1,372 m)
• Easy 2-wire CopperLink connection via built-in RJ-45 or 2-position terminal block
• Passes higher layer protocols and supports 802.1Q (VLAN tagging)
• Automatic learning and aging address table
• Five LEDs monitor power, CopperLink link and status, Ethernet link and activity
• Auto-sensing 10 or 100Base-T and full or half-duplex Ethernet operation
• No configuration required!

Models 2035 - 2039 Operate Like the 2025 Only Much Faster - 115.2 Kbps / Multiple Models, pls select Product Variants from Detail Page

Benefits

• Auto-Directional Data Conversion
• Data Rates to 115.2 kbps
• Automatic Parallel/Serial Mode Selection (all Models)
• Automatic DCE/DTE Mode Selection (Model 2035 & 2036)
• Support for Both Hardware and X-ON/X-OFF Flow Control
• No AC Power or Batteries Required
• Integral 6 foot (1.8m) Cable (Model 2035 & 2039)-Custom Lengths Available